Sparkccd 7000 can be widely used in metallurgy, casting, machinery, steel and non-ferrous metal industries. It is widely used in automobile manufacturing, aerospace, shipbuilding, mechanical and electrical equipment, engineering machinery, electronic and electrical, education, scientific research and other fields of raw materials, parts, product technology research and development. It can be used for sample analysis of Fe, Al, Cu, Ni, Co, Mg, Ti, Zn, Pb, Sn, Mn and other metals and their alloys.

Spark CCD 7000 full spectrum direct reading spectrometer uses high resolution linear CCD (charge coupled device) as detector to realize full spectrum scanning. Using intelligent control light chamber inflation system, the instrument performance is more stable, service life is longer. The massive spectral lines make the analysis no longer limited. The curve segments jump to the same element, and different spectral lines realize seamless connection. The third element interference correction makes the element analysis more accurate. It can arbitrarily add material matrix and analysis elements at the user’s site without adding hardware, so the maintenance is convenient. All digital solid-state light source with continuously adjustable energy and frequency can adapt to various materials; the network port has the advantages of high speed and versatility.

• Detector sensitivity industry advanced
• High resolution CCD detector
• Number of pixels: 3648 + 46 pixel size: 8 μ M
• Thin coating, lower detection limit in UV band, can be used for low content
• Create the optimal optical system in the 10000 class ultra clean environment
• The Loran optical system with pashing Runge structure has no aberration and uniform resolution
• The grating has a focal length of 500mm, 2700 lines / mm and a line resolution of 0.7407nm/mm
• The pixel resolution is 0.005926nm
• Intelligent control system, restart time-consuming industry leader
• In the tidal flushing mode, it only takes 30 minutes for the cold machine (shut down for 12 hours) and 5 minutes for the heat engine to start
• Intelligent judgment analysis interval time, reasonable supplement of argon, reduce argon consumption
• 60ml / min ultra-low standby flow, one bottle of argon for 24 hours and 70 days for standby plit exposure.One shot, split exposure, simultaneous acquisition and counting.
• Independent control of the integral exposure time of different CCD can improve the intensity of trace elements and reduce the detection limit of the instrument
• The stability of the instrument is improved by adjusting the integral time with the band.

• All solid state digital spark source
• All solid state digital spark light source (national patent No. ZL 2010 1 0118150.4
• The energy and frequency can be continuously adjusted, and the maximum frequency can reach 1000Hz
• MTBF (mean time between failures) > 5000 hours
• Coaxial spin gas path exciter
• Spin gas path
• Supercharged self purge excitation is sufficient
• No cleaning is required for 1000 shot
• Constant temperature system
• Silica gel heating plate, heating uniform and stable
• High precision temperature control system, temperature control accuracy ± 0.1 ℃, multiple insulation measures, isolated from the influence of environmental temperature, ensure the stability of optical system
• Acquisition system
• Network port transmission mode, stable and reliable data transmission
• Multi thread data acquisition, high speed and high frequency
• Self protection lens isolation valve
• Easy to maintain and eliminate optical system pollution caused by misoperation
• High speed intelligent correction
• The whole spectrum can be corrected by a single excitation
• Automatic calibration of pixel drift to ensure the stability of optical system
• Third element interference
• The addition and multiplication interference between elements are automatically deducted, and the analysis results are more accurate
• Curve segment jump
• The high and low curve of element content is segmented and automatically matched, and the analysis range is wide
• Automatic matching of unknown samples and optimal analysis program
• Analysis software
• Simple, fresh and powerful multi language version (Chinese, English, Russian, German) intelligent smelting burden calculation
• Brand identification
• Support carbon equivalent and other automatic calculation functions.

Spark 8000 can be widely used in metallurgy, casting, machinery, steel and non-ferrous metal industries. Spark 8000 can be widely used in automobile manufacturing, aerospace, shipbuilding, mechanical and electrical equipment, engineering machinery, electronic and electrical engineering, education, scientific research and other fields of raw materials, parts, product technology research and development, and can be used for Fe, Al, Cu, Ni, Co, Mg, Ti, Zn, Pb, Sn, Mn Sample analysis of other metals and their alloys.

Spark 8000 full spectrum spark direct reading spectrometer uses high-resolution linear array CMOS (complex metal oxide semiconductor) as detector The detection instrument has high integration, fast reading speed, low power consumption and high long-term stability; each pixel has its own amplifier, which can adjust the intensity of special elements, increase the accuracy of the instrument, reduce the analysis limit, and realize full spectrum scanning. Using intelligent control light chamber inflation system, the instrument performance is more stable, service life is longer. The massive spectral lines make the analysis no longer limited. The curve segments jump to the same element, and different spectral lines realize seamless connection. The third element interference correction makes the element analysis more accurate. It can arbitrarily add material matrix and analysis elements at the user’s site without adding hardware, so the maintenance is convenient. All digital solid-state light source with continuously adjustable energy and frequency can adapt to various materials; the network port has the advantages of high speed and versatility.

• Power requirements: 220 V ± 10%, single phase, 16a, 2.5kva
• Dimensions: 500cm × 825cm × 451cm (w * D * h) weight: 70kg
• Detector sensitivity
• High sensitivity CMOS detector
• Pixels: 4096
• Pixel size: 7 μ M
• Thin coating, lower detection limit in UV band, low content, good linearity, small image lag, wide frequency range, can work in 1 ~ 10MHz
• Create the optimal optical system in the 10000 class ultra clean environment
• Pashing Runge structure Loran optical system, no aberration, uniform resolution, high luminous holographic grating, grating focal length of 500mm, with 2700 lines / mm, leading the whole industry, line resolution: 0.7407nm/mm, pixel resolution: 0.005926nm, spectral line range: 130-800nm (can analyze N, Li, Na, K and other elements)
• Easy to start and the cost is greatly reduced
• In the tidal flushing mode, it only takes 30 minutes for the cold machine (shut down for 12 hours) to start, and the heat engine to start for 5 minutes. The interval time of intelligent judgment and analysis, reasonable supplement of argon, and the ultra-low standby flow rate of 60 ml / min are reduced. A bottle of argon is standby for 24 hours and 70 days
• Split exposurere
• The integrated exposure time of different CMOS can be controlled independently to enhance the intensity of trace elements, reduce the detection limit of the instrument, and adjust the integration time with the band to improve the stability of the instrument.

• All solid state digital spark source
• All solid state digital spark light source (national patent No. ZL 2010 1 0118150.4)
• The energy and frequency can be continuously adjusted, and the maximum frequency can reach 1000Hz
• MTBF (mean time between failures) > 5000 hours
• Coaxial spin gas path exciter
• Spin gas path
• Supercharged self purge excitation is sufficient
• No cleaning is required for 1000 shot
• Constant temperature system
• Silica gel heating plate, heating uniform and stable
• High precision temperature control system, temperature control accuracy ± 0.1 ℃
• Multiple thermal insulation measures to isolate the influence of ambient temperature to ensure the stability of optical system
• Acquisition system
• Network port transmission mode, stable and reliable data transmission
• Multi thread data acquisition, high speed and high frequency
• Third element interference
• The addition and multiplication interference between elements are automatically deducted, and the analysis results are more accurate
• Curve segment jump
• The high and low curve of element content is segmented and automatically matched, and the analysis range is wide
• Automatic matching of unknown samples and optimal analysis program
• Analysis software
• Simple and fresh, powerful
• Multilingual version (Chinese, English, Russian, German)
• Intelligent calculation of smelting burden
• Brand identification
• Support carbon equivalent and other automatic calculation functions
• Efficient intelligent correction
• Words can be corrected for the whole spectrum
• Automatic calibration of pixel drift to ensure the stability of optical system

SparkCCD 6500 can be widely used in industries such as metallurgy, casting, machinery, steel, and non-ferrous metals. It is widely used in the research and development of raw materials, parts, and product processes in fields such as automotive manufacturing, aerospace, shipbuilding, electromechanical equipment, engineering machinery, electronics and electrical engineering, education, and scientific research. It can be used for sample analysis of metals and their alloys such as Fe, Al, Cu, Ni, Co, Mg, Ti, Zn, Pb, Sn, Mn, etc.

• Power requirement: 220V ± 10%, single-phase, 16A, 2.5KVA, weight: 70kg
• Overall dimensions: 470 * 872 * 435mm (width * depth * height)
• Industry leading detector sensitivity:
• High resolution CCD detector, pixel count: 3648+46, pixel size: 8 μ m. Thin coating with lower detection limit in UV band
• Creating the optimal optical system in a 10000 level ultra clean environment
• Paschen Runge structure Roland optical system, without aberration, with uniform resolution, high emission holographic grating, grating focal length of 500mm, with 2700 lines/mm, line resolution of 0.7407nm/mm, pixel resolution of 0.005926nm, spectral line range of 160-500nm
• Slice exposure with high recognition intensity for trace elements
• Increase amplitude, lower detection limit, single excitation, split exposure, simultaneous acquisition, simultaneous counting, independent control of integrated exposure time for different CCD, increase the intensity of trace elements, reduce the detection limit of the instrument, adjust the integration time with the band, and improve the stability of the instrument
• Intelligent control system
• Tidal flushing method, intelligent judgment and analysis of interval time, reasonable replenishment of argon gas, reducing argon consumption, 60ml/min ultra-low standby flow rate, one bottle of argon gas standby for 70 days within 24 hours

• All solid state digital spark source
• All solid state digital spark light source (national patent No. ZL 2010 1 0118150.4)
• The energy and frequency can be continuously adjusted, and the maximum frequency can reach 1000Hz
• MTBF (mean time between failures) > 5000 hours
• Coaxial spin gas path exciter
• Spin gas path
• Supercharged self purge excitation is sufficient
• No cleaning is required for 1000 shot
• Constant temperature system
• Silica gel heating plate, heating uniform and stable
• High precision temperature control system, temperature control accuracy ± 0.1 ℃
• Multiple thermal insulation measures to isolate the influence of ambient temperature to ensure the stability of optical system
• Acquisition system
• Network port transmission mode, stable and reliable data transmission
• Multi thread data acquisition, high speed and high frequency
• Third element interference
• The addition and multiplication interference between elements are automatically deducted, and the analysis results are more accurate
• Curve segment jump
• The high and low curve of element content is segmented and automatically matched, and the analysis range is wide
• Automatic matching of unknown samples and optimal analysis program
• Analysis software
• Simple and fresh, powerful
• Multilingual version (Chinese, English, Russian, German)
• Intelligent calculation of smelting burden
• Brand identification
• Support carbon equivalent and other automatic calculation functions
• Efficient intelligent correction
• Words can be corrected for the whole spectrum
• Automatic calibration of pixel drift to ensure the stability of optical system

Catalog