testmachines

ISO 11193 Testing on gloves made of rubber It specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from cross-contamination. It also covers rubber gloves intended for use in handling contaminated medical materials and gloves with […]

Industry Standard – Plastics – ASTM D638 It mainly describes the test method for determination of the tensile properties of reinforced and unreinforced plastics. It helps determine essential mechanical properties, including tensile stress, strain, tensile modulus, tensile strength, tensile strength at yield and tensile strength at break. This test method can be used for testing materials

ASTM D1525 Standard Test Method for VICAT Softening Temperature of Plastics This test method covers determination of the temperature at which a specified needle penetration occurs when specimens are subjected to specified controlled test conditions. The reference method for uniform heat transfer is the oil bath. Other transmission media such as air or direct contact with a heating

ASTM D624 Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers This testing method describes methods for determining the tear strength or tear resistance of vulcanized rubber or thermoplastic elastomers. For standard-compliant testing in accordance with ASTM D624, it is essential to purchase the complete standard. (For further methods for determining the tear resistance of elastomers please

ASTM D1621 Compression test on rigid cellular plastic (according to ISO 844) Compressive properties include the Compressive Strength, Max. Compressive Deformation, and the Compression Modulus, which describes the Short-term Deformation under load. The testing standards differ in the dimensions of the specimen and in the test execution. ISO 844 and EN 826 describes that the movement of

Comprehensive Analysis of ISTA Test Standards + Practical Measurement Protocol As the “safety guardian” in packaging and transportation, ISTA testing serves as a core tool for reducing cargo damage rates. This article analyzes the ISTA standard system and practical solutions: I. ISTA Standard: The “Customs Clearance Code” in the Packaging Industry ISTA testing validates packaging

ISO 8318:2000 Packaging – Complete, filled transport packages and unit loads – Sinusoidal vibration tests using a variable frequency In modern logistics and transportation processes, the safety and integrity of packaging have always been a key concern for both businesses and consumers. In order to ensure that products are not damaged by vibration during transportation

ASTM D4169 Standard Practice for Performance Testing of Shipping Containers and Systems (The Standard Practice for Performance Testing of Transport Packaging Boxes and Systems is a medical device product packaging performance testing standard recognized by the US Food and Drug Administration (FDA)). This standard simulates various conditions that may be encountered in actual transportation environments

ISO 2247:2000 Packaging – Complete, filled transport packages and unit loads – Vibration tests at fixed low frequency In modern logistics and transportation processes, the durability of packaging is directly related to whether products can be safely and intact delivered to consumers. Especially in environments with long-distance transportation, frequent handling, and even mechanical vibrations, the