Probador de tracción in situ Mtest (2-5000N)

Adnantages & Characteristics

*Closed structure design, not only beautiful, but also can effectively protect the screw, bearings and other parts;
*The whole machine adopts ball screw and V guide rail, improving the rigidity;
*Using the modular design concept, integrated bending, compression,shear and other clamps;
*Fast integration with the SEM by the adapter;
*Many grips are available to suit different customer needs.

Technical parameter

*  Test Force： 50/100/200/500/1000/2000/3000/5000N

*   Max. Dynamic Force： 1000N

*   Amplitude ：20N

*   Fatigue frequency： 20Hz

*   Force measurement range：4%-100%FS

*   Force measurement accuracy：Indicating value 1%

*   Deformation measurement accuracy:Better 土2µm

*   Beam speed range： 0.01-3mm/min

*   Beam displacement rate： 0.01µm

*   Operating temperature: ≤600℃

Amodular components

Suitable for non-metallic fixture form

一Embedded grip

The grip of resin and hard rubber can be realized.

Apply to bionic material grip form

—Polyurethane side action grip

The grip of grass, leaf, dragonfly wings, thin film,etc biotic materials can be realized.

The grip of grass, leaf, dragonfly wings, thin

film,etc biotic materials can be realized.

Achievable high temperature of lower than 600℃ in test environment;

Temperature fluctuation at room temperature of lower than 2℃

Temperature fluctuation in vacuum lower than 1℃

Technical parameters of the refrigeration

module

Achievable cooling temperature difference of lower than 5℃

Temperature fluctuation at room temperature of lower than 2℃

Temperature fluctuation in vacuum of lower than 1℃

Infrared temperature measurement module

It can measure the temperature quickly and conveniently.

SEM+EBSD in situ tester

Adnantages & Characteristics

*  Apply for a gasket hydraulic load sensor belt:

*  With multi-station test method (EBSD70+standard

*  Ultra-small size, ultra-thin body, 27mm at the test piece;

*  Small mass with less than 0.8kg, which can be directly placed on the 5-axis scanning electron microscope stage(EV010)

*  Ultra-thin body, the height of the sample is 27mm and the mass is less than 0.8Kg, which is easy to put into the small electrical environment cavity.

Application of industrial CT situ

Adnantages & Characteristics

*  Equipped with quartz glass bearing frame with 360° degree ray unobstructed observation;

*  Maintain wedge-shaped clamping, applying for brittle materials;

*  Independence working for tensile test;

*  Manual/electric loading multi-version.

A stretcher for synchrotron radiation source

Adnantages & Characteristics

*  Testing the mechanical properties of the specimen material under the condition of synchrotron radiation source;

*  The upper and lower beams move symmetrically, and the center point of the sample remains static to make the measurement in situ;

*  The upper and lower clamps make synchronous rotation movement and the sample can be rotated around the circumference during the test so as to get the 360 degree views of observation;

*  The induction heating coil is used as the heating device and the heating speed is so high that can reach 800 degrees Celsius in a few seconds.

Mtest Series (0-100N)

Adnantages & Characteristics

*  Horizontal structure is adopted in the whole machine;

*  Equipped with compact appearance and small space occupation;

*  Static force value: ±1 – ±200N:

*  Dynamic force value: ±1 – ±500N;

*  Working frequency: ≤ 20Hz.

Mtest Series (0-500N)

Adnantages & Characteristics

*  Vertical structure is adopted in the whole machine;

*  Equipped with compact appearance, which can be placed on the desktop;

*  Static force value: ±1-±5KN;

*  Dynamic force value: ±1-±10KN;

*  Working frequency: ≤ 50HZ.