Product Introduction
Mainly suitable for automatic balance correction of generator rotors.
| Project Details | Parameter Range |
| Equipment appearance dimensions | 1400*1600*1800mm |
| Cycle time | 40-45s |
| Workpiece height range | 20-60mm (standard) |
| Workpiece diameter range | Φ 80-120mm (standard) |
| Balance speed | 1200-2600rpm |
| Balance correction method | Drill hole |
| Reduction rate of unbalance | URR≥90% |
| Minimum attainable residual imbalance | ≤0.3g.mm/kg |
| Drive mode | O-ring drive |
| Equipment power supply | Three phase five wire 380V AC |
English 
Spanish 
Russian