JSWALTEC Series Electronic UTM (Suitable for metal and composite materials)

Standards

GB, ISO, ASTM, DIN

Application

It is applicable for wide range of material for tensile, compression, bending, shearing and low cycle test. Suitable for metal, spring, composite materials and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.

Features

• This machine can automatically calculate parameters such as tensile strength, yield strength, elongation, stress at a given elongation, elongation at a given stress, and modulus of elasticity according to standards such as GB, JIS, ASTM, DIN, and BS.
• It is suitable for testing in quality supervision, teaching and research, aerospace, steel metallurgy, automotive, and construction materials industries.
• The microcomputer-controlled electronic universal testing machine is widely used for mechanical property testing of non-metallic materials such as rubber, plastics, wires and cables, textiles, waterproof materials, non-woven fabrics, and fasteners, as well as metal wires, foils, sheets, and rods. With specialized fixtures, it is also suitable for tensile, compression, peeling, shearing, cracking, and bending (folding) tests on various finished products. It can also be used for mechanical property testing of profiles and components. Furthermore, it is suitable for testing materials such as ropes, belts, threads, rubber, and plastics where sample deformation is large and testing speed is high, demonstrating a very broad range of applications.
• It can print multiple data points and generate graphical outputs for comparison based on different data. It features high control precision and easy operation.
• Measurable parameters: maximum force, minimum force, breaking strength, upper and lower yield strength, tensile strength, compressive strength, elastic modulus, elongation, maximum, minimum, and average values ​​of the peel range, etc. (customers need to select these before ordering). It has multiple protections including overload, overcurrent, overvoltage, undervoltage, overspeed, and stroke protection.
  

  Max. Capacity	100kN~300kN	600kN
  Force measurement range	0.4% ~ 100% FS
  Accuracy	better than ±0.5%
  Deformation measurement accuracy	±1%/±0.5%
  Test force indication accuracy	better than ±0.5%
  Deformation measurement range	2-1000%
  Deformation rate control accuracy	≤±1%
  Displacement rate range	0.005mm/min ~ 500mm/min	0.005 ~ 250mm/min
  Displacement rate accuracy	≤±1%
  Test methods	Tensile, Compression, Bending, Shearing, etc.
  Control mode	Computer control